Logo

Installation to a USB stick of at least 2 GB

The installation is easiest to perform in Windows Vista/7/8/10. Follow these steps:
1. Download Rufus - Create bootable USB drives the easy way.
2. Use Rufus to install the ISO image to your USB stick. Use the dd command.
3. Set the BIOS so your computer primarily will boot from USB HDD (or similar).
4. Restart the computer with the USB stick in place and so forth.

If Rufus doesn't work you must do the installation in a Linux system. The ISO file is a isohybrid so you can just open up a terminal and run the following command: sudo cp exton-multibootcd-6os-1180mb-160928.iso /dev/sdX

NOTE 1: Change /dev/sdX to /dev/sdb, /dev/sdd or... (be sure to check carefully before you run the install command).

NOTE 2: If any of the six systems won't start: Try again!

Back